Description, Features & Specifications

Description

The Eshooter Kestrel V2 SE Electronic Trigger Unit delivers smart, app-controlled performance upgrades for airsoft AEGs using standard V2 gearboxes. This front-wired ETU integrates seamlessly into most Tokyo Marui-based replicas and provides players with powerful customization through the Eshooter App. With 200 levels of pre-cocking adjustment, users can fine-tune trigger response and cycle timing to achieve precise, high-speed shooting. The SE model retains Eshooter's advanced functions while offering a budget-friendly entry point for players seeking premium electronic control. The unit supports both brushed and brushless motors, handles voltages from 3.75V to 17V, and offers full firing mode control including safe, semi, binary, burst, auto, and sniper options. Sniper delay settings from 0.5 to 3 seconds provide precision for designated marksman configurations, while ROF control allows users to adjust fire rate to match battery output. Reliability and protection are core to the Kestrel V2 SEs design. Built with adaptive active braking and a smart electronic fuse, it safeguards internal components from overheating, overloads, and short circuits while ensuring smooth cycle stops and consistent gear alignment. The ETU features locked rotor protection, a sleep mode that activates after one hour of inactivity, and firmware that can be updated wirelessly via the Eshooter App for continuous performance enhancements. Its conformal-coated PCB resists dust and humidity, and the 1.5mm*2 high-temperature Teflon wiring prevents damage during prolonged use. Compatible with LiPo, LiFe, and LiHv batteries, this ETU is engineered to meet the demands of both competitive and recreational airsoft players. The Eshooter Kestrel V2 SE offers a combination of reliability, smart protection, and precision control that makes it one of the most accessible and advanced electronic trigger units for V2 AEG platforms today.

In the Box
1x Base Plate
1x Sensor
1x Power Cord
1x Top Plate

Specifications:
Brand: Eshooter
Model: Kestrel V2 SE ETU
Compatibility: Tokyo Marui Standard V2 Gearboxes
Wiring Configuration: Front Wired
Voltage Range: 3.75V to 17V
Operating Current: 17mA
Supported Motors: Brushed and Brushless
Supported Batteries: LiPo, LiFe, LiHv
Selector Modes: SAFE, SEMI, BINARY, BURST, AUTO, SNIPER
Pre-Cocking Adjustment: 200 Levels
Sniper Delay: 0.5s, 1s, 2s, 3s
ROF Control: Adjustable
Cycle Detection: DSG, HSG, Standard Gear Compatible
Firmware Update: OTA via Eshooter App
Active Brake: Adaptive
Smart Fuse: Electronic Auto-reset
Locked Rotor Protection: Yes
Sleep Mode: 1 Hour Idle Timer
Wire Material: High Temperature Teflon
Wire Diameter: 1.5mm*2
Surface Protection: Conformal Coating
Operating Temperature: -20C to +60C
Humidity Resistance: <80 percent
Dimensions: 47.4 x 28.7 x 13.5mm
Weight: 27.6g

California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Description

The Eshooter Kestrel V2 SE Electronic Trigger Unit delivers smart, app-controlled performance upgrades for airsoft AEGs using standard V2 gearboxes. This front-wired ETU integrates seamlessly into most Tokyo Marui-based replicas and provides players with powerful customization through the Eshooter App. With 200 levels of pre-cocking adjustment, users can fine-tune trigger response and cycle timing to achieve precise, high-speed shooting. The SE model retains Eshooter's advanced functions while offering a budget-friendly entry point for players seeking premium electronic control. The unit supports both brushed and brushless motors, handles voltages from 3.75V to 17V, and offers full firing mode control including safe, semi, binary, burst, auto, and sniper options. Sniper delay settings from 0.5 to 3 seconds provide precision for designated marksman configurations, while ROF control allows users to adjust fire rate to match battery output. Reliability and protection are core to the Kestrel V2 SEs design. Built with adaptive active braking and a smart electronic fuse, it safeguards internal components from overheating, overloads, and short circuits while ensuring smooth cycle stops and consistent gear alignment. The ETU features locked rotor protection, a sleep mode that activates after one hour of inactivity, and firmware that can be updated wirelessly via the Eshooter App for continuous performance enhancements. Its conformal-coated PCB resists dust and humidity, and the 1.5mm*2 high-temperature Teflon wiring prevents damage during prolonged use. Compatible with LiPo, LiFe, and LiHv batteries, this ETU is engineered to meet the demands of both competitive and recreational airsoft players. The Eshooter Kestrel V2 SE offers a combination of reliability, smart protection, and precision control that makes it one of the most accessible and advanced electronic trigger units for V2 AEG platforms today.

In the Box
1x Base Plate
1x Sensor
1x Power Cord
1x Top Plate

Specifications:
Brand: Eshooter
Model: Kestrel V2 SE ETU
Compatibility: Tokyo Marui Standard V2 Gearboxes
Wiring Configuration: Front Wired
Voltage Range: 3.75V to 17V
Operating Current: 17mA
Supported Motors: Brushed and Brushless
Supported Batteries: LiPo, LiFe, LiHv
Selector Modes: SAFE, SEMI, BINARY, BURST, AUTO, SNIPER
Pre-Cocking Adjustment: 200 Levels
Sniper Delay: 0.5s, 1s, 2s, 3s
ROF Control: Adjustable
Cycle Detection: DSG, HSG, Standard Gear Compatible
Firmware Update: OTA via Eshooter App
Active Brake: Adaptive
Smart Fuse: Electronic Auto-reset
Locked Rotor Protection: Yes
Sleep Mode: 1 Hour Idle Timer
Wire Material: High Temperature Teflon
Wire Diameter: 1.5mm*2
Surface Protection: Conformal Coating
Operating Temperature: -20C to +60C
Humidity Resistance: <80 percent
Dimensions: 47.4 x 28.7 x 13.5mm
Weight: 27.6g

California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Earn 0 points on this purchase.

Learn more

Choose Your Membership

Select a plan that works for you

XTREME Superstore by Eshooter

V050

Eshooter Kestrel V2 SE Electronic Trigger Unit (ETU) for V2 Gearbox AEGs w/ App Control and Smart Fuse Protection - Front Wired

$43.99
$43.99
Shipping calculated at checkout.
Designed for standard Tokyo Marui V2 gearboxes with front-wired configurationBudget-friendly SE edition maintaining Kestrels adv...  Read more
  • Designed for standard Tokyo Marui V2 gearboxes with front-wired configuration
  • Budget-friendly SE edition maintaining Kestrels advanced smart ETU functionality
  • Wireless Eshooter App control for real-time configuration and performance tracking
  • 200-level pre-cocking adjustment for enhanced trigger response and precision firing
  • Supports brushless and high-speed/high-torque motors including SOLINK models
  • Selectable firing modes: SAFE, SEMI, BINARY, BURST, AUTO, and SNIPER
  • Save up to 3 personalized settings and switch profiles using trigger input
  • Rate of fire control for precise AEG speed adjustment regardless of battery voltage
  • Sensor calibration ensures reliable and consistent shot cycles
  • Active brake system increases gearbox longevity and stabilizes piston position
  • Cycle detection supports DSG, HSG, and standard gears
  • Smart fuse with overload, overheat, and short-circuit protection
  • Battery protection system monitors voltage and prevents over-discharge
  • Firmware updates supported via wireless OTA connection through Eshooter App
  • Sleep mode engages after 1 hour of inactivity to preserve battery life
  • Locked rotor protection prevents gearbox and motor damage during malfunction
  • Sniper delay feature allows controlled firing intervals of 0.5s, 1s, 2s, or 3s
  • High temperature resistant 1.5mm*2 Teflon wiring ensures durability during extended use
  • Supports multiple battery types including LiPo, LiFe, and LiHv
  • Surface conformal coating provides environmental resistance against moisture and dust
Get FREE Returns within 14 days.
Add Free Returns to your cart for extra peace of mind.

XTREME Returns

As a small business, we face a choice: we can either raise all of our prices to cover the cost of returns, or we can keep our prices low and offer an optional Return Guarantee. We chose the second option because it's fairer to you. That $5 goes directly toward the logistics of a pre-paid return, meaning you get a "no-questions-asked" experience without us having to inflate the cost of every item in our shop. It keeps us independent and keeps your wallet happy. When you shop with us, your order isn’t just a number—it’s handled by a small team that cares about the gear we sell. Because we don't have the massive overhead of a giant company, we use this $5 guarantee to bridge the gap. It provides you with a pre-paid, priority return path, ensuring that if you need to send something back, we can process it immediately and get your refund or exchange moving. Thank you so much for understanding.
Free fast shipping on orders $50+
For all Superstore Plus Members. Otherwise, orders $199+. Excludes heavy items like Bulk BB Bags.

Free Shipping

Get free shipping on all orders above $200. This excludes certain items such as bulk BBs, or any sort of item that requires special handling (such as hazmat).
Pay any way you want, securely.
We accept all major cards, Afterpay, PayPal, Crypto, Apple Pay, Cash App & More. Obviously, all payment info is encrypted.

Payment Methods

We accept a wide variety of payment methods to ensure our customers can get what they want from us without hassle. Like many online stores, we use Shopify Payments. Their platform, which is partnered with Stripe, is secure. Looking for a payment method which is currently unavailable? Please let us know! We will look into it ASAP.
Free In Store Pickup!
Pick your items up at our field for FREE.

Free In Store Pickup!

Ship your item to our store free! We will ship your item directly to our shop if we don't have it there already. Otherwise, you can just pick up your item immediately if it's currently stocked in store.

Join our Rewards Program and earn points on every order! No other Airsoft shop has a system like this!

Join Now

Check Out These Related Products

Best Sellers